Montana Right of Way Pest Control 12 Hour Package

$159.00

12 Hour | Online HD Video | Approved for 12 Credits:  Category 37

  • 4 Hour Right of Way:  Pest Control
  • 4 Hour Right of Way:  Weed Control
  • 2 Hour Integrated Pest and Resistance Management
  • 1 Hour Pesticides in the Environment
  • 1 Hour Pesticide Application Procedures
Category:

Description

PACKAGE CONTENTS:

12 Hour | Online HD Video | Approved for 12 Credits:  Category 37

  • 4 Hour Right of Way:  Pest Control
  • 4 Hour Right of Way:  Weed Control
  • 2 Hour Integrated Pest and Resistance Management
  • 1 Hour Pesticides in the Environment
  • 1 Hour Pesticide Application Procedures

 


Right of Way
Pest Control


COURSE SYLLABUS

Course Description

This study guide was prepared from the Commercial Applicator Study Manual for Category 6, Right-of-Way Pest Control as published by the Mississippi State University Extension Service and approved by the Mississippi Department of Agriculture, Bureau of Plant Industry.

After completing this course in its entirety, participants will be able to:

• Identify five main groups of pests and the pests specific to each group
• Name the physical characteristics that aid in the identification of specific insects
• Identify the main cause of plant diseases
• Differentiate between the life cycles of annuals, biennials, and perennials
• Describe the developmental stages through which plants progress


Lesson 1 

  • Introduction to Pests
  • Hosts
  • Insect Features
  • Vertebrate
  • Plant Diseases
  • Plant Life Cycles

Lesson 2 

  • Pest Control Methods
  • Pesticides
  • Formulations

Lesson 3 

  • Pesticide Labels
  • Information
  • Illegal Uses
  • Storing and Disposing of Containers

Lesson 4 

  • Pesticides in the Environment
  • Endangered Species
  • Off Target Movement
  • Pollinators

Lesson 5 

  • Pesticides and Humans
  • Hazards
  • Routes of Entry
  • Acute and Chronic Effects

Lesson 6 

  • LD/LC
  • Signal Words
  • Exposure Symptoms
  • First Aid
  • Medical Attention

Lesson 7 

  • PPE
  • Respirators

Lesson 8 

  • Respirators
  • Fit Test
  • Clean Up

Lesson 9 

  • FIFRA
  • Special Provisions
  • Misuse Penalties

Lesson 10 

  • Application
  • Methods
  • Safety Systems
  • Sprayer Components
  • Applicators

Lesson 11 

  • Calibration
  • Calculations
  • Minimizing Drift

Final Assessment


RIGHT OF WAY:
Weed Control


COURSE SYLLABUS

Course Description

This course will review the methods and techniques to manage vegetation on rights of way and non-cropland industrial sites safely without damage to non-target species, sites, objects or the environment

After completing this course in its entirety, participants will be able to:

  • Gain an understanding of the issues involved in controlling vegetation by roadways, utility lines,a nd pipelines.
  • Tailor a management strategy that addresses the unique needs of rights of way weed management.

Lesson 1 

  • Roadside
  • Utility lines
  • Pipelines
  • Railways

Lesson 2 

  • Plant Succession
  • Weed Biology/Ecology

Lesson 3 

  • Weed Control Techniques
  • Cultural
  • Prevention
  • Mechanical

Lesson 4 

  • Biological
  • Chemical
  • Early Herbicides
  • 2,4-D
  • Current Herbicides

Lesson 5 

  • Identification
  • Application Site
  • Timing
  • Rate

Lesson 6 

  • Soils, moisture, topography, temperature, vegetative cover
  • Chemical characteristics, soil residue, organic matter, microbes, fertility, pH

Lesson 7 

  • Drift
  • Resistance Definition
  • Selection
  • Herbicide resistant weeds

Lesson 8 

  • Calibrations
  • Sprayers
  • Conventional Booms

Lesson 9 

  • Boomless Sprayers
  • Calculations

Final Assessment 


 

Integrated Pest 
and Resistance Management


COURSE SYLLABUS

Course Description

Integrated Pest Management. Integrated pest management, or “IPM” for short, is an environmentally sound approach to controlling a pest population through common sense methods. Each control method will be addressed and defined in this presentation. IPM is a strategy focusing on the long-term prevention of pests or their damage through the use of multiple techniques.

Basics of Sampling for Plant Pathogens. Pathogens are often the root cause of plant failure. Implementing an effective strategy using chemicals to target an identified pathogen is an essential element of agricultural stewardship. This course teaches the basics of sampling, and the different tools and techniques needed to accurately identify crop pathogens.

Insect Identification. Insects are a major part of our daily lives. Whether we realize it or not, there are millions of insects around us at all times. This presentation is a brief overview of basic identification of insects that we commonly come in contact with. At the end of this presentation, I hope that you have a better understanding of how to identify insects that you might encounter in work or in your day-to-day activities.

Pesticide Calibration. Calibration ensures that your equipment delivers the correct amount of pesticide uniformly across your field or target area and if done incorrectly or not at all has major consequences. It can mean the difference between control or failure of a pesticide. This course ensures you will be able to accurately calibrate using many types of application methods: broadcast application, banded application, multiple nozzles per row, and in-furrow applications.

After completing this course in its entirety, participants will be able to:

  • Monitor and control pests through cultural, biological, mechanical, chemical, genetic, and host plant resistance methods.
  • Describe resistance, how it develops, and integrative ways it can be managed.
  • Identify the characteristic differences between arthropods and insects, and the stages of metamorphosis.
  • Describe the different of calibration types and why it is so important to calibrate before pesticide application occurs.
  • Become familiar with specific details and mathematical instructions on how to perform broadcast applications, banded applications, multiple nozzles per row, and in-furrow applications.

Chapter 1 – Integrated Pest Management 

  • Cultural Control
  • Mechanical Control
  • Chemical Control
  • Genetic Control
  • Host Plant Resistance
  • Resistance Management
  • Structured Refuge

Chapter 2 – Basics of Sampling for Plant Pathogens 

  • Why bother to sample for plant pathogens?
  • Keys to Sampling
  • Sample Collection Tools

Sampling Scenarios

  • Turf
  • Leaves
  • Fruit
  • Wilt
  • Woody Plants

Chapter 3 – Insect Identification 

  • Odonata (Dragonfly and Damselfly)
  • Orthoptera (Grasshoppers, Crickets, Katydids)
  • Isoptera (Termites)
  • Hemiptera (True Bugs, Hoppers, Aphids)
  • Coleoptera (Beetles)
  • Hymenoptera (Wasps, Bees, Ants)
  • Lepidoptera (Butterflies)
  • Diptera (Flies, Mosquitoes, Midges)

Chapter 4 – Pesticide Calibration 

  • When to Calibrate?
  • Calibration Terminology
  • Broadcast Sprayer Application
  • Banded Application
  • Multiple Nozzles per Row Application
  • In-Furrow Application

Final Assessment 


PESTICIDES IN THE ENVIRONMENT


COURSE SYLLABUS

Course Description

Applicators and the public share concerns about how pesticides may harm the environment. Initially, hazards to humans were the primary reason the U.S. Environmental Protection Agency (EPA) decided to classify a pesticide as a restricted-use product. Now, more and more pesticide labels list environmental effects (such as contamination of groundwater or toxicity to birds or aquatic organisms) as reasons for restriction. Anyone who uses a pesticide—indoors or outdoors, in a city or on a farm—must consider how that pesticide affects the environment.

After completing this course in its entirety, participants will be able to:

  • Describe how pesticide applications can affect the environment.
  • Explain how to prevent pesticide drift, runoff, and movement to nontarget areas.
  • Discuss how to prevent pesticide residue accumulation associated with mixing, loading, and equipment washing.

Pesticides in the Environment

Lesson 1

The Environment
Pesticide Characteristics
How Pesticides Move in the Environment
Preventing Pesticide Drift

Lesson 2 

Sources of Water Contamination
Preventing Surface Water and Groundwater Contamination
Preventing Harmful Effects on Sensitive Areas and
Nontarget Organisms
Protecting Endangered Species

Final Assessment


PESTICIDE APPLICATION PROCEDURES


COURSE SYLLABUS

Course Description

Today’s pest management practices require modern equipment to apply a variety of pesticides. Pesticides may be
applied as sprays, dusts, granules, gases (vapors), fogs, baits, rubs, or dips. The vast array of application equipment must
be matched to the pesticide as well as to the size and type of the job. To make an effective, safe, and efficient application,
read the label first. In addition, you must properly select, operate, calibrate, and maintain your equipment.

After completing this course in its entirety, participants will be able to:

  • Identify the factors (e.g., nozzles, volumes, pressures, and speeds) that affect calibration.
  • Demonstrate how to determine the amount of pesticide concentrate and diluent to use.
  • Explain how to choose appropriate drift reduction practices.

Pesticide Application Procedures

Lesson 1

Application Methods
Safety Systems
Application Equipment
Equipment Calibration

Lesson 2 

Calibration
Calculating Area
Calculating the Application Rate
Techniques to Minimize Drift

Final Assessment

 


Course instructors will be available by email or telephone between 9am and 5pm Eastern Standard Time. They will assist you with questions regarding course content.

If you have any questions, please call us at 1-800-727-7104 or send an email to info@traininginstitutesedu.com. Email responses will usually be returned promptly, but guaranteed within one business day.

Student policies and procedures are always available by going to our website and scrolling to the bottom of the page (See Privacy and Refund Policy).

 
265,230 Courses Taken
 
 
Your courses are inexpensive with an easy to use platform.  Much more convenient than taking time off work to go to a live course.  I like that I can do it on my own time, VERY CONVENIENT!
Adam Madison from St. George, UT
 
Chat with us
Scroll Up